Follow the step-by-step guide and watch the video below to get best practice advice on how to install the Hikvision 5A Bullet Camera when wall mounting.
The camera features full 1080p resolution and a 4 megapixel camera, whilst night vision is enhanced using infrared technology and built-in LEDs which illuminate up to 30m, providing ‘dusk to dawn’ CCTV monitoring, assures the manufacturer.
Step 1: Take out the camera and check the accessories
-
Screws, expansion bolts
-
CD or Online download
-
Quick start guide
-
G3/4 adapter sealing plugs
-
Adapter plate
-
Threader
-
Auxillary video cable
-
Torx wrench
Step 2: Install the memory card and format it by your mobile phone.
Step 3: Uninstall the junction box
Step 4: Install the G3/4 adapter
Step 5: Mark and then drill the holes on the wall
Step 6: Install the adapter plate
Step 7: Connect the grounding wire
Step 8 : Route the cables (WARNING: Keep the unused sealing plugs intact. Do not pierce through them)
Step 9: Take out the side cover
Step 10: Install the junction box
Step 11: Hook the safety rope and connect the cables
Step 12: Install the camera
Step 13: Adjust the view angle and fasten the screws once happy with the positioning
Step 14: Remove the protective film
Kindly note On-Line purchase only. (No retailing at Store)
If Urgently needs,
1. PayNow to 90088960,
2. print receipt & products picture to Whatsapp to 98534404,
3. Delivery within 3~7 days or visit our store pick & go 12pm~6pm daily.
(Training, Setup, Tech Support, Configuration Fees apply $30)
Choicecycle SGCCTV Sim Lim Square 02-81 Whatsapp +65 98534404 [email protected]