CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
$8.00
CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
Technical Support +65 81120788, Site Visit Maintenance +65 81985572.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
How to install CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
SP1 Retail Price $18.00 each. $8.00 (minimum 200pcs), $12.00 (minimum 50pcs). Download Specification
SP8 Retail Price $198.00 each. $58.00 (minimum 10pcs), $88.00 (minimum 3pcs).
SP16 Retail Price $298.00 each. $88.00 (minimum 10pcs), $128.00 (minimum 3pcs).
1. Collection from SGCCTV Choicecycle Sim Lim Square CCTV SPECIALIST #02-81 11am~8pm. Whatsapp 90254466 for stock level before visit.
4. Can issue e-Invoice for your accounting. (upon request)
More Common choice to meet your needs: || Fisheye 360 degree CC380PF || C1C || C1HC || C3A Battery Camera || C6CN || C6TC || HIK Q1 || USB2052MP || Dahua 2C || 5G 2.4G Pan Tilt Camera CC524PT ||
More Choice : Battery-Powered Camera BC1-B1 || IP CAMERA Outdoor C3W || Hikvision 5MP Fisheye DS-2CD2955FWD-I || Dual-Band IP CAMERA 5G C6P || IP Camera Dual-band 2.4-5G ||
12MP Fisheye-Network Camera CC81IPC59AE ||
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
- ➤ The video signal ray protector is mainly applied in surge protection for the cable TV transmission system, the CCTV video monitoring system equipment.
- ➤ High Continuous Current Capacity, Long Life Energy saving, environmental protection, frame structure for easy installation.
- ➤Adopt multi-level protection, low residual voltage, good protection effect. Prevents multiple types of system equipment from being permanently damaged.
- ➤ Low insertion loss, excellent transmission performance. Built-in rapid semiconductor protection device, response speed in nanoseconds.
- ➤ The coaxial cable transmission line can be widely used (such as hard disk recorder, matrix, optical transceiver, camera)
CHOICE Brand and SGCCTV Brand are Singapore IPOS Trade Mark Registered.
Widely deployed in Shopping Malls, Residential, Commercial, Office, Warehouse.
Compatible with ALL DVR & NVR ONVIF protocols.
Great Technical Support at Sim Lim Square 02-81 11am~7pm Daily +65 98534404
Technical Support +65 81120788, Site Visit Maintenance +65 81985572.
To install a CCTV surge protection BNC lighting protector, follow these general steps:
- Gather the necessary tools and equipment: You will need the CCTV surge protector, a screwdriver, BNC connectors, coaxial cable, and a cable cutter/stripper.
- Power off the CCTV system: Before working with any electrical equipment, ensure that the power to the CCTV system is turned off to prevent any accidents or damage.
- Locate the BNC connectors: Find the BNC connectors on both ends of the coaxial cable that connects the camera to the DVR. The connectors resemble cylinders with a pin in the center.
- Disconnect the cables: Carefully detach the BNC connectors from the camera and the DVR. This may involve unscrewing or pulling them apart, depending on the specific connectors used.
- Install the surge protector: Take the BNC lighting protector and connect it between the coaxial cable ends. Ensure that the surge protector is securely connected to both the camera and the DVR.
- Secure the connections: Use a screwdriver to tighten the connectors on the surge protector, ensuring a snug fit. This will help maintain good electrical contact.
- Connect the cables: Reattach the coaxial cable to both the camera and the DVR. Make sure the connectors are firmly screwed on or pushed in until they click into place.
- Check the installation: Double-check that all connections are secure and properly tightened. Verify that the surge protector is correctly installed between the camera and the DVR.
- Power on the CCTV system: Once you’re confident that the surge protector is installed correctly, you can turn on the power to the CCTV system.
Please note that the specific installation process may vary depending on the brand and model of the surge protector and CCTV system you are using. Always refer to the manufacturer’s instructions for detailed guidance on installing the specific surge protector you have. Additionally, if you are unsure about any step or lack experience with electrical installations, it is recommended to consult a professional or an experienced technician for assistance.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
To install the CCTV Surge Protection BNC Lightning Protector, follow these steps:
- Gather the necessary tools and equipment: You will need the BNC Lightning Protector, a screwdriver, coaxial cable, and the CCTV camera system.
- Identify the location: Determine the optimal location for installing the surge protector. It should be close to the CCTV DVR system or power supply unit.
- Power off the system: Before proceeding with the installation, make sure to power off the CCTV camera system and disconnect it from the power source to avoid any electrical mishaps.
- Locate the BNC connectors: The BNC connectors are usually found at the back of the CCTV DVR system or the power supply unit. Identify the BNC connectors that you want to protect using the surge protector.
- Disconnect the BNC cables: Carefully detach the BNC cables from the CCTV DVR system or the power supply unit. Remember to keep track of which cable corresponds to which port for reconnection later.
- Connect the surge protector: Take the BNC Lightning Protector and connect the BNC connectors of the cables you just disconnected into the corresponding ports on the surge protector. Ensure that the connections are secure.
- Connect the surge protector to the DVR system: Using the coaxial cable, connect one end to the output port of the surge protector and the other end to the input port of the CCTV DVR system or the power supply unit.
- Secure the connections: Check that all the connections are tight and secure to avoid any signal loss or interference.
- Power on the system: Once you have completed the installation and ensured all connections are secure, you can reconnect the CCTV camera system to the power source and power it on.
- Test the system: Verify that the CCTV camera system is functioning correctly and that the video signal is clear. Monitor the system for any signs of lightning-related issues, such as sudden drops in video quality or system malfunctions.
Note: It’s important to read and follow the manufacturer’s instructions specific to the BNC Lightning Protector you have purchased, as installation procedures may vary slightly. Additionally, if you are unsure about any step of the installation process or if you have concerns about your electrical system, it’s recommended to consult a professional electrician or technician for assistance.
CCTV Surge Protection 16ch Hub BNC Lighting Protector CHOICE BNC Lighting Protector 16 Channel BNC Video Surge Protector Arrester for CCTV DVR Camera System
Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.
Donec accumsan auctor iaculis. Sed suscipit arcu ligula, at egestas magna molestie a. Proin ac ex maximus, ultrices justo eget, sodales orci. Aliquam egestas libero ac turpis pharetra, in vehicula lacus scelerisque. Vestibulum ut sem laoreet, feugiat tellus at, hendrerit arcu.
Nunc lacus elit, faucibus ac laoreet sed, dapibus ac mi. Maecenas eu ante a elit tempus fermentum. Aliquam commodo tincidunt semper. Phasellus accumsan, justo ac mollis pharetra, ex dui pharetra nisl, a scelerisque ipsum nulla ac sem. Cras eu risus urna. Duis lorem sapien, congue eget nisl sit amet, rutrum faucibus elit.
Related Products
-
Rated 4.00 out of 5
Door Access Fingerprint DA22C Biometric RFID Password WIFI Reader Time Attendance Reduce Manpower SME Digitalization Access Control Power Supply Box Repair
Rated 4.00 out of 5Save27.1%Save $130.00Only$350.00$480.00$350.00 -
Reviews
There are no reviews yet.